Gardex

  • UL Listed
  • NEC Type MC
  • NFPA 130 & 502
  • Low smoke zero halogen
  • 90?C*
  • 600/1000 volt
  • Gardex in black
    Image: Gardex in black

Gardex is a UL listed, low smoke, zero halogen armoured power cable that provides outstanding performance in the most rugged of environments. It’s a multicore, self-contained conduit and wiring system that is simplicity itself to install and connect. The continuously welded and corrugated aluminium sheath provides excellent protection against mechanical and physical abuse, and the hermetically sealed barrier is impervious to water, gas and corrosive elements, giving it outstanding reliability. Gardex cables can be installed on trays, in ducting or conduits or can be self-supported or buried directly in the ground.

 

*Rated 90°C for normal operation in wet and dry locations, 130°C for emergency overload conditions, and 250°C for short circuit conditions.

At a glance

  • Self-contained conduit and wiring system
  • Provides a hermetically sealed barrier
  • Considered an electrical shield in certain applications
  • Provides ruggedness and physical protection for cables against workplace and installation hazards
  • Armour is impact and crush resistant to UL 2225 Standards
  • Aluminum sheath provides superior electrical shielding performance?for AC drive applications
  • Outer jackets are sunlight, oil, and moisture resistant
  • Oil resistant II or Artic-Grade (-40?C) jackets are available
  • All jackets have printed sequential length (feet or metre) markings

Performance standards

  • Insulation in accordance with ICEA and UL standards
  • Insulated conductors are UL Listed Type XHHW-2
  • UL listed Type LS (limited smoke) per UL 1277 and UL 1685
  • UL approved 90°C for both wet and dry locations
  • UL listed for sunlight resistance
  • UL listed as gasoline and oil resistance
  • Jacket exceeds requirements for UL class XL/90°C and ICEA publication T-33-655, Type II
  • Passes IEEE 1202/FT4 vertical tray flame test and ICEA 70,000 BTU/h vertical tray flame test (T-30-520)
  • Single conductors pass vertical flame test Type A as defined in ICEA S-95-658 (6.8.2)
  • Meets the requirements of NFPA 130 & 502

Construction

  • Conductor: Annealed, tin-coated copper, class ”B” strand (ASTM B-8 & B-33)
  • Insulation: Flame retardant low smoke zero halogen crosslinked polyolefin
  • Circuit Identification: Printed numbers per ICEA Method 4. (alternative colours available upon request)
  • Fillers: (Where required)
  • Binder tape: Helically applied polyester
  • Ground Wire(s): Annealed copper class “B” to comply with NEC requirements
  • Armour: Continuously welded and corrugated aluminium
  • Jacket: Reduced wall, black, flame retardant crosslinked low smoke zero halogen polyolefin

brochure-download-500x350

Sales at Goldwing

Our sales team has years of technical experience, enabling us to deliver a personal and professional service.

  • No minimum order quantity for our bespoke service
  • Cable cut to your required length
  • Vast stock holdings mean next day delivery

Call our sales team today to discuss your requirements.

01502 713 161
桃红色界